Skorter | 7 Inch Skull LED Headlight

Presenting the latest 7-inch Skull headlight model, crafted for multi-purpose use, and compatible with any vehicle equipped with a standard 7" headlight or a designated 7" mounting area. This product is ideal for Jeeps, vintage cars, and motorcycles.

FEATURES

• Simple Installation - Just connect it and you're good to go; typically finished in 20 minutes or less, with integrated anti-flicker technology, eliminating the need for additional decoders!

• Outstanding Brightness - Utilizing high-quality Cree chips, this headlight shines 50% more brightly than similar models. Light output: 6000 LM (high beam), 3200 LM (low beam) per unit.

• DOT certified (DOT SAE HL VOL 12V LY DOT7-001) + E-Mark certified (HR-PL-E9-01.1125) - ensures your lighting meets regulations for public roads and adheres to the standards outlined in Section 108 of the Federal Motor Safety Standards. The DOT certification is etched on the lens. Lifespan exceeds 80,000 hours.

INSTALLATION INSTRUCTIONS

• The 3-pin connector unites the low beam and high beam

• The blue wire represents the white light, the yellow wire is for the yellow light, and the green wire signifies the Skull flash

TECHNICAL SPECIFICATIONS

• Current Draw: 2.47A@ 12.08V (low beam), 3.3A @ 12.08V (high beam)

• Raw Luminous Flux: Low: 3300LM, High: 6000LM
  

• Power Consumption: Low: 30W, High: 40W
  

• Operating Voltage: 12-24V
  

• Housing Color: Black

• IP Rating: IP68

• Product Weight: 0.6kg / 1.32lb

• Temperature Range: -20 to 120 degrees F

• Dimensions: 

PACKAGING

• 1 * Skull LED Headlight

NOTE

• Kindly note that slight discrepancies in measurements may occur due to manual calculation.

• The actual color of the product may differ slightly from what is shown in the photographs due to monitor settings and lighting conditions.